Home > Industry Knowledge > Content

What is Stainless steel membrane housing?

Sep 22, 2017

Stainless steel membrane shell is the basic component of reverse osmosis equipment, the material used 304 or 316L stainless steel seamless tube.

Overview

Stainless steel membrane shell is the basic component of reverse osmosis equipment, the material is made of 304 stainless steel seamless tube, according to the end of the cover seal is divided into: clamp type, flange type, built-in; by way of water into: Enter Length and reverse osmosis membrane components supporting the number of products inside and outside the polishing, beautiful and practical, the use of pressure to reverse osmosis system normal operating pressure requirements.

Technical characteristics

Pressure: 2.0 ~ 2.5MPa

Water way: both ends of the water, both sides of the water

Structure: standard spare parts, easy to disassemble

Seal: withstand voltage test

Two ends of the organizational structure: clamp type, card type, the spring type.

Performance Features Edit

4040 membrane shell is divided into two kinds of seamless and seamless, made of SUS304 stainless steel. Both ends of the ABS head with silicone O-ring seal, sealing performance, long service life.

8040 Membrane shell: sub-card sets and end caps type, made of SUS304 seamless stainless steel tube, good sealing performance, high pressure, not aging, installation, cleaning film convenient, working pressure (Mpa): 4.0. Membrane shell inlet and outlet can be based on customer requirements, end into (out) or side into (out). Stainless steel membrane shell has 2.5 inch, 4 inch, 8 inch, etc.,

1.4 inch RO membrane shell 1 core loaded 2 core loaded 3 core loaded, 4 core equipment, and other series.

2. Membrane shell tube is divided into two kinds of seamless pipe, seamless tube.

3. Inlet and outlet connection side of the side out of the end of the end of the two; specifications have 6 points x4 points and 4 points x4 two.

4. Head material ABS, stainless steel.

What is Reverse osmosis membrane ?

Reverse osmosis reverse osmosis technology is based on the role of osmotic pressure than the solution, according to other substances can not pass through the semipermeable membrane and these substances and water separated. The membrane diameter of the reverse osmosis membrane is very small, so it can effectively remove dissolved salts, colloids, microorganisms, organic matter and so on in water. The system has the advantages of good water quality, low energy consumption, no pollution, simple process and simple operation.

An overview editor

Stainless steel membrane shell is the basic component of reverse osmosis equipment, the material is made of 304 stainless steel seamless tube, according to the end of the cover seal is divided into: clamp type, flange type, built-in; by way of water into: Enter Length and reverse osmosis membrane components supporting the number of products inside and outside the polishing, beautiful and practical, the use of pressure to reverse osmosis system normal operating pressure requirements.

Technical features editor

Pressure: 2.0 ~ 2.5MPa

Water way: both ends of the water, both sides of the water

Structure: standard spare parts, easy to disassemble

Seal: withstand voltage test

Two ends of the organizational structure: clamp type, card type, the spring type.

Performance Features Edit

4040 membrane shell is divided into two kinds of seamless and seamless, made of SUS304 stainless steel. Both ends of the ABS head with silicone O-ring seal, sealing performance, long service life.

8040 Membrane shell: sub-card sets and end caps type, made of SUS304 seamless stainless steel tube, good sealing performance, high pressure, not aging, installation, cleaning film convenient, working pressure (Mpa): 4.0. Membrane shell inlet and outlet can be based on customer requirements, end into (out) or side into (out). Stainless steel membrane shell has 2.5 inch, 4 inch, 8 inch, etc.,

1.4 inch RO membrane shell 1 core loaded 2 core loaded 3 core loaded, 4 core equipment, and other series.

2. Membrane shell tube is divided into two kinds of seamless pipe, seamless tube.

3. Inlet and outlet connection side of the side out of the end of the end of the two; specifications have 6 points x4 points and 4 points x4 two.

4. Head material ABS, stainless steel.